JAD FDV board
Frequency to voltage conversion board

The FDV board is used to convert a digital frequency signal into a 0 – 10V analog signal for use with data acquisition hardware.

The FDV has the ability to deal with a very small as well as large signals from speed sensors, encoders and optical sensors in a wide range and to convert them to a suitable analog signal.

Advantages

• Low cost, available off the shelf at JAD
  
• Capacitive coupled input for noisy signals.
• Custom ranges available on special request.
• Mountable in 72mm Phoenix din rail boat system.
  
  

Specifications

• 12V to 24V supply
  
• Output voltage 0 to 10V
• Pulse voltage from 1V to 24V PTP
• Output filtered to 10Hz
• Accuracy 1%
• Linearity 1%
• Temp range -10 to 55 DegC.
  
• Measurement ranges as follows:

1. 0 to 333Hz
   
2. 0 to 666 Hz
   
3. 0 to 1KHz
   
4. 0 to 3.3KHz
   
5. 0 to 6.6KHz
   
6. 0 to 10KHz
   
7. 0 to 33KHz
   
8. 0 to 66KHz
   
9. 0 to 100KHz

---

Downloads

JAD FDV board product sheet
JAD FDV board connection diagram